Sharp FO-5550 FO-5550 Operation Manual - Page 171
Clearing Paper Jams, Power Save Mode, Confidential Operations, Print Hold, Relay Broadcast, Relay
View all Sharp FO-5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
9. Troubleshooting Messages and Signals NO RELAY FUNC A relay request has been denied because the other machine does not have a relay broadcast function, its memory is full, or it is not a Sharp machine. ONHOOK DIAL MODE The SPEAKER key has been pressed and the fax machine is waiting for you to dial. PAPER JAM The printing paper is jammed. See the following section, Clearing Paper Jams. POWER SAVE MODE Power Save Mode is on. See Power Save Mode in Chapter 5. RCVD CONF. FAX A confidential fax has been received in memory. Print the fax as explained in Confidential Operations in Chapter 5. RCVD PRINT HOLD FAX The Print Hold function has been turned on and you have received one or more faxes in memory. Print out the faxes as explained in Print Hold in Chapter 5. RCVD RELAY REQUEST Your fax machine has received a Relay Broadcast request and is transmitting the requested document to the end receiving machines. See Relay Broadcast in Relay Request in Chapter 5. RELAY REFUSED A relay request has been denied because your fax number has not been entered in the relay machine's list of permitted numbers, an auto dial number not programmed in the relay machine was specified, or your fax number has not been programmed in your machine. REMOVE ORIGINAL(S) The original document is jammed. See the following section, Clearing Paper Jams. SIZE ERROR This message will be followed by one of the paper sources in parentheses, and informs you that the paper loaded in that source is not all the same size. REPLACE TONER The toner cartridge must be replaced. RX DOCUMENT TRAY OFF The received document tray is not attached. Attach it as explained in Connections in Chapter 1 (the tray must be attached for the fax machine to operate properly.) 169