Sharp FP-N40CX FP-N40CX Operation Manual - Page 17

ENGLISH 6 Dry the filter outdoors if possible in a well ventilated area. CAUTION • Let the filter dry thoroughly. If used while the filter is still moist, then the air that is exhausted from the main unit will have an odor. It may take 1 or 2 days to dry. • Dry the filter outdoors in a well ventilated area. If dried indoors, it may give an odor. In addition, the water dripping off the filter may soil your floor. • Make sure that the activated carbon has not shifted to one side inside the filter. If it has, distribute it evenly with your fingers. • Dry the filter as shown in the above illustration. The wet filter is heavy. Fix it securely for drying to make sure it does not fall down. • The filter takes longer to dry in winter, on rainy days. Wash it on a day when the weather is good and dry it in the sun. Move it indoors at night to prevent freezing. 7 Reinstalling the Filter and Restart Reinstall the filter as shown on Page E-11. • The filter air may have an odor until the filter is completely dry. 8 Once the Washable Active Carbon Filter has been cleaned, connect the power cord to the outlet and use a pointed instrument to activate the Filter Reset on the Remote Control, pointing the Remote Control toward the receiver on the main unit, (Refer to page E-13) • Once the Filter Reset Button has been activated, you will hear a beep sound that means that the unit has been reset. • The Filter indicator light will then go out automatically. Filter Reset Button POWER ON/OFF FILTER RESET OTFIFMER FILTER CLEANING Clean the top surface of the Pre-Filter lightly with a vacuum cleaner. Pre-Filter NOTE • The True HEPA Filter is damaged easily. Do not bring it into direct contact with the nozzle of a vacuum cleaner or wash it with water. The True HEPA Filter should never be washed or cleaned. E-15