Sharp HT-SB250 HT-SB250 Operation Manual
Sharp HT-SB250 Manual
 |
UPC - 074000369801
View all Sharp HT-SB250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp HT-SB250 manual content summary:
- Sharp HT-SB250 | HT-SB250 Operation Manual - Page 1
ENGLISH MODEL odesoftHT-SB250(BK) SOUND BAR SYSTEM OPERATION MANUAL ww.barcodesoft.com SOUND BAR SYSTEM HT-SB250 eSymbology:Code93; FontFacename:Code93MHr Encode Remote control x 1 (RRMCGA235AWSA) RCA cable (2 pins - 2 pins) x 1 (QCNWGA041AWPZ) AC/DC adaptor x 1 (RADPAA061AWZZ) AC power cord x - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 2
the user to the presence of important operating and maintenance (servicing) instructions in the Connect the equipment into an outlet on a circuit different from that to which the receiver is connected significantly improves the playback quality of audio, delivering a dynamic 3D entertainment - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 3
during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 4
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 23) Protective Attachment Plug - The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 5
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Model Specific Section Your Product Model Number & Description: HT-SB250(BK) Sound Bar System (Be sure to have this information available when you need service for your Product.) Warranty Period for this Product: Additional Item(s) Excluded - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 6
any service operation or when not in use for a long period. ● The AC/DC adaptor supplied with the HTSB250(BK) must not be used with other equipment. ● Never use an AC/DC adaptor other than the one specified. Otherwise, problem or serious hazards may be created. ■ Volume control The sound level - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 7
(TV) Press the button to switch the input source. Volume Up and Down Buttons Turn up/down the TV volume. Channel Up and Down Switch up/down the Buttons TV channels. Note: ● Some models of SHARP TV may not be operable. ● SHARP TV remote control will not work with HT-SB250(BK) system. E- - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 8
System preparation Make sure to unplug the AC power cord service technician. ● Mounting screws are not supplied. SHARP is not responsible for accidents resulting from improper installation. ■ Driving screws SHARP designed the units so you may hang them on the wall. Use proper screws (not supplied - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 9
System preparation (continued) 2 Make a hole on the wall following the screw point marks on the sound bar Installation image: TV HT-SB250 (screws x 4)(screws x 4) VCR DVD player Wall surface Wall mount angle Wall surface Note: Make sure all screws are fully tightened. (screws are not supplied - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 10
wires (not supplied) into each hole as shown and tie the safety wires to the LCD TV stand. Sound bar connections to TVs Caution: Turn off all other equipment before making any connections. Tuner receiving for other audio system ● Placing the antenna near the unit AC power cord may cause noise - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 11
power connection After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then to the AC outlet. ■ Using with the AC/DC adaptor 1 Plug the AC power cord remote control DC INPUT jack (DC 12V) AC power cord Use only the supplied AC/DC adaptor - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 12
if this occurs. ● Keep the remote control away from moisture, heat, shock, and vibrations. CINEMA/GAME SPORT ■ To turn the power on Press the ON/STAND-BY button. The sound mode indicator and display light up. Note: If the power does not turn on, check whether the power cord is plugged in properly - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 13
to restore the volume. ■ Preset sound mode Main unit operation: To change to a different mode, press the SURROUND button repeatedly until the desired sound mode lights up. Remote control operation: Press a desired sound mode on the remote control. STASNDTAARNDDARWDOW CINEMA/GAME WOW HWDOisWonHfoDr - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 14
Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. ■ General Symptom No sound is heard. Noise is heard during - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 15
external interference (mechanical shock, HT-SB250 excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: Set the unit to the stand-by mode and turn the power on again. 2 If the - Sharp HT-SB250 | HT-SB250 Operation Manual - Page 16
100 - 240 V ~ 50/60 Hz) Power 10 W consumption Maximum 32 W output power Speaker 2.1-way Speaker System Front Speakers: 1-1/2" (40 mm) Full Range Impedance: 12 ohms / Channel Subwoofer: 2-1/4" (57 mm) Woofer (x4) Impedance: 3 ohms Input terminals Dimensions Weight Analog input (LINE 1): RCA
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
ENGLISH
MODEL
HT-SB250(BK)
SOUND BAR SYSTEM
OPERATION MANUAL
*TINSZA877AWZZFP*|
Printed in Malaysia
10M R AS
1
Note:
This product is recommended for flat panel TV (LCD and plasma).
Accessories
Please confirm that only the following accessories are included.
Remote control x 1
(RRMCGA235AWSA)
RCA cable
(2 pins - 2 pins) x 1
(QCNWGA041AWPZ)
AC/DC adaptor x 1
(RADPAA061AWZZ)
AC power cord x 1
(QACCDA005AWZZ)
Wall mount angle x 2
(LANGKA167AWFW)
Foot cushion x 4
(PCUSSA118AWZZ)
Pattern paper x 1
(TCAUHA022AWZZ)
( Spike + Nut ) x 4
(CLEGMA005AW02,
Length: 25 mm)
Nut
TINSZA877AWZZ
is a trademark of SRS Labs, Inc.
WOW HD technology is incorporated under license from SRS Labs, Inc.