Sharp HT-SB250 HT-SB250 Operation Manual - Page 16

Error indicators and warnings When you fail to perform operations properly, the following messages are displayed on the unit. Display Meaning or or ● Malfunction of the surround circuit. Place the unit away from noise source and plug the AC power cord into another AC outlet. (*) Power indicator (blinks red) ● When the protection circuit of the amplifier is activated. (*): Should the same message appear even if the unit is unplugged and plugged in or is set to the stand-by mode and on again, contact your local dealer where you purchased the unit. Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There may be some deviations from these values in individual unit. ■ General Power source DC IN 12V 4A: AC/DC adaptor (AC 100 - 240 V ~ 50/60 Hz) Power 10 W consumption Maximum 32 W output power Speaker 2.1-way Speaker System Front Speakers: 1-1/2" (40 mm) Full Range Impedance: 12 ohms / Channel Subwoofer: 2-1/4" (57 mm) Woofer (x4) Impedance: 3 ohms Input terminals Dimensions Weight Analog input (LINE 1): RCA type x 1pair (L/R) 500 mV / 47 kohms Analog input (LINE 2): Stereo mini jack Ø 3.5 mm 100 mV / 47 kohms Width: 33-1/2" (851 mm) Height: 3-3/4" (96 mm) Depth: 2-3/4" (70 mm) 4.19 lbs. (1.90 kg) E-15