Sharp HT-SL70 HT-SL70 Operation Manual - Page 11

Placing the system Installation image: TV Notes: ● As the sound from the system is omni-directional, you can place the speaker anywhere you like. However, it is recommended to place it as close to the TV as possible. ● The front panel of the speaker is not removable. Caution: ● Do not change the installation direction when the unit is turned on. Placing the stand Place the stand as shown. Blu-ray DVD player ACTIVE SUBWOOFER SYSTEM HT-SL70 Place the system as shown. Remove the protective film covering the sound bar and subwoofer before using the system. SUBWOOFER SYSTEM ACTIVE SUBWOOFER SYSTEM HT-SL70 ACTIVE SUBHWT-OSLO7F0ER SYSTEM System connections Make sure to unplug the AC power cord before making any connections. Subwoofer Right Left Stand White Sound Bar AC outlet Red AC 120 V ~ 60 Hz Speaker connection Connect the wire without insulation tube to the minus (-) terminal, and the wire with red and white insulation tube to the plus (+) terminal. Caution: ● Use speaker with an impedance of 4 ohms or more, as lower impedance speaker can damage the unit. ● Do not make a mistake when connecting the right and left speakers. The right speaker is the one on the right side when you face the unit. ● Do not let the bare speaker wires touch each other. ● Do not allow any objects to fall into or to be placed in the bass INCORRECT reflex duct. ● Do not stand or sit on the subwoofer/sound bar. You may be injured. E-10