Sharp HT-SL70 HT-SL70 Operation Manual - Page 14
General Control
View all Sharp HT-SL70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
General Control Make sure to enable the HDMI CEC when making HDMI connection. To turn the power on Plug the AC power cord into an AC outlet, the stand-by indicator turns red. This unit will automatically power on if: 1. TV or similar component which supports HDMI CEC, is turned on. 2. audio signal is detected from Audio input. The stand-by indicator turns blue. Notes: ● HDMI input will override the Audio input signal. ● Audio input will function only when there is no signal from HDMI input. Audio Return Channel (ARC) (Audio Return Channel submenu) The audio return channel (ARC) enables an HDMI ARCcapable TV to send the audio stream to the HDMI OUT jack of the receiver. To use this function, your TV must support the ARC. Volume Volume can only be controlled from your TV. Power Off This unit will automatically go to stand-by mode if: 1. TV or similar component which supports HDMI CEC, is turned off. 2. no signal from Audio input is detected after 1 minute. E-13