Sharp IG-A40UW IG-A40UW Operation Manual - Page 16

Specifications

Page 16 highlights

SPECIFICATIONS Model Power supply Fan Speed Adjustment Power consumption (W) Operating noise level (dBA) Airflow volume CFM (m3/min) Applicable floor surface area *1 Ion density (ions/cm3) *2 Power cord Outer dimensions Weight IG-A40U 120V 60Hz HIGH 37 MED. 19 LOW 10 47 494(14) 25,000 40 381(10.8) 538 sq ft (50m2) 12,000 34 300(8.5) 7,000 8.3ft (2.5m) 37in(W) 9-1/8in(D) 19in(H) 940mm(W) 230mm(D) 480mm(H) 33.1lbs (15.0kg) *1 The target floor surface area for which an emitted airborne ion density of about 25,000 ions/cm3 can be measured at a point near the center of the room (at a height of about 1.2m from the floor), during operation at the HIGH mode when the main unit is placed near a wall. *2 Ion count per cm3 blown into air at around the center of the room ( at a height of approx. 1.2m from the floor) during operation at each airstream setting when the main unit is placed near the wall. •The number of ions will vary according to the room conditions and operation mode. Standby Power In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product consumes about 0.3W of standby power. For energy conservation, unplug the power cord when the unit is not in use. E-14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

37in(W)
9-1/8in(D)
19in(H)
940mm(W)
230mm(D)
480mm(H)
Model
Power supply
Fan Speed Adjustment
Power consumption (W)
Operating noise level (dBA)
Air
ow volume CFM
(m
3
/min)
Applicable
oor surface area
*
1
Ion density (ions/cm
3
)
*
2
Power cord
Outer dimensions
IG-A40U
120V
60Hz
HIGH
MED.
LOW
47
40
34
37
19
10
E-14
Weight
494(14)
381(10.8)
300(8.5)
538 sq ft (50m
2
)
25,000
12,000
7,000
8.3ft (2.5m)
33.1lbs (15.0kg)
*1 The target
oor surface area for which an emitted airborne ion density of about 25,000
ions/cm
3
can be measured at a point near the center of the room (at a height of about 1.2m
from the
oor), during operation at the HIGH mode when the main unit
is placed near a
wall.
*2 Ion count per cm
3
blown into air at around the center of the room ( at a height of approx.
1.2m from the floor) during operation at each airstream setting when the main unit is
placed near the wall.
The number of ions will vary according to the room conditions and operation mode.
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the wall
outlet, this product consumes about 0.3W of standby power.
For energy conservation, unplug the power cord when the unit is not in use.
SPECIFICATIONS