Sharp KB-6100NS Owners Manual for KB-6100NK - Page 3
Electrical Requirements
UPC - 074000617582
View all Sharp KB-6100NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Customer Assistance To assist in reporting this appliance, please record below the model number and serial number located on the unit. We also suggest you record all the information listed and retain for future reference. MODEL NUMBER DATE OF PURCHASE Dealer Servicer SERIAL NUMBER / / Telephone Telephone TO PHONE: DIAL 1-800-BE-SHARP (237-4277) for: SERVICE (for your nearest Sharp Authorized Servicer) PARTS (for your authorized parts distributor) ADDITIONAL CUSTOMER INFORMATION TO WRITE Sharp Electronics Corporation Customer Assistance Center 1300 Naperville Drive Romeoville, IL 60446-1091 Please provide the following information when you write or call: model number, serial number, date of purchase, your complete mailing address (including zip code), your daytime telephone number (including area code), your email address and description of the problem. TO ACCESS INTERNET: www.sharpusa.com Electrical Requirements A 120V, single phase, 60 Hz, AC only 15 or 20 amp electrical supply, properly grounded in accordance with the National Electric code and local codes and ordinances is required. IMPORTANT The appliance is equipped with a three-prong grounding plug for protection against possible electric shock hazards. It must be plugged into a dedicated, grounded, electrical outlet. If only a two-prong electrical outlet is available, it is the responsibility of the customer to have it replaced with a dedicated, properly grounded three-prong electrical outlet. Do not under any circumstances: • Cut or remove the third (ground) prong from the powercord. • Use a power cord that is frayed or damaged. • Connect the appliance to an extension cord. • Do not use an adaptor to fit plug to outlet. Note: Use of a ground fault interrupter (GFI) is not recommended. Name Plate Location * Serial Number is located on Name Plate 3