Sharp KC-830U KC-830U Operation Manual - Page 15

Care And Maintenance, Filter Indicator Light, Back Panel And Sensor

Page 15 highlights

ENGLISH CARE AND MAINTENANCE To maintain optimum performance of this air purifier, please clean the unit including the sensor and filters periodically. When cleaning the unit, be sure to first unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result. FILTER INDICATOR LIGHT Care Cycle After 720 hours of use (30days × 24hours = 720) The Filter Indicator Light will illuminate as a reminder to perform maintenance of the Back Panel/Pre-filter, Sensor, and Humidifying Filter. The Indicator Light will turn on after approximately 720 hours of use. After performing maintenance, reset the Filter Indicator. 1 Plug the unit in, turn power ON. 2 Press the RESET button for 3 seconds. • The Filter Indicator Light will go off. • Even if the Filter Indicator Light is already off, the RESET button should be pressed to reset the maintenance timer. BACK PANEL and SENSOR Care Cycle Whenever dust accumulates on the unit or every 2 months Gently remove dust from the sensor opening and the back panel, using a vacuum cleaner attachment or similar tool. 1 In case of heavy dirt, soak the back panel in water with a small amount of kitchen detergent. (Approx. 10min.) (Avoid scrubbing the back panel when washing.) 2 Rinse the back panel repeatedly with clean water to remove the solution residue. 3 Drip dry the panel to remove excess water. Back Panel E-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

ENGLISH
E-13
CARE AND MAINTENANCE
FILTER INDICATOR LIGHT
The Filter Indicator Light will illuminate as a reminder to perform maintenance of the
Back Panel/Pre-
lter, Sensor, and Humidifying Filter. The Indicator Light will turn on
after approximately 720 hours of use.
To maintain optimum performance of this air puri
er, please clean the unit including
the sensor and
lters periodically.
When cleaning the unit, be sure to
rst unplug the power cord, and never handle the
plug with wet hands. Electrical shock and/or bodily injury may occur as a result.
Care Cycle
After 720 hours of use
(
30days × 24hours = 720)
Care Cycle
Whenever dust accumulates
on the unit or every 2 months
After performing maintenance, reset the Filter
Indicator.
1
Plug the unit in, turn power ON.
Press the RESET button for 3 seconds.
• The Filter Indicator Light will go off.
• Even if the Filter Indicator Light is already off, the RESET
button should be pressed to reset the maintenance timer.
2
Gently remove dust from the sensor opening and the back panel, using a vacuum
cleaner attachment or similar tool.
Back Panel
BACK PANEL and SENSOR
<When the back panel has stubborn dirt>
1
In case of heavy dirt, soak the back panel in water with a small amount of kitchen
detergent.
(Approx. 10min.)
(Avoid scrubbing the back panel when washing.)
2
Rinse the back panel repeatedly with clean water to remove
the solution residue.
3
Drip dry the panel to remove excess water.