Sharp LC-15AV7U Service Manual - Page 11
Instructions for Handling, Semi-conductors, Ground for Human Body, Ground for Workbench - repair
View all Sharp LC-15AV7U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Instructions for Handling Semi-conductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1MΩ) that is properly grounded to remove any static electricity that may be charged on the body. 2. Ground for Workbench Be sure to place a conductive sheet or copper plate with proper grounding (1MΩ) on the workbench or other surface, where the semi-conductors are to be placed. Because the static electricity charge on clothing will not escape through the body grounding band, be careful to avoid contacting semi-conductors with your clothing. < Incorrect > CBA < Correct > Grounding Band CBA Conductive Sheet or Copper Plate 3-4 LCV_NOTE