Sharp LC-26D40U LC-26D40U LC-32D40U Operation Manual - Page 39

Appendix Removing the stand Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching stand • Before performing work make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 hex key 2 Soft cushion Unfasten the four screws used to secure the stand in place. Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.) NOTE • To attach the stand, perform the above steps in reverse order. Setting the TV on the wall CAUTION • Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. Using an optional bracket to mount the TV • You can ask a qualified service professional about using an optional AN-26AG1 bracket for LC-26D40U or AN- 37AG2 bracket for LC-32D40U to mount the TV to the wall. • Carefully read the instructions that come with the bracket before beginning work. Hanging on the wall Wall mount bracket. (See the bracket instructions for details.) About setting the TV angle Selected Angle of TV item LC-26D40U Up to 20° LC-32D40U Up to 10° Vertical mounting Angular mounting NOTE • Detach the cable clamp on the rear of the TV when using the optional mount bracket. 39