Sharp LC-26SH20U Operation Manual - Page 37

Useful adjustment settings Press MENU and the MENU screen displays. Press 4/t_ to select _ (LOCKS). Press A/V. The password entering menu displays. Input the 4-digit password by using 0-9, then press ENTER. The LOCKS menu displays. Press A/Y to select "V-CHIP SET", then press 4/_-. The V-CHIP SET menu displays. Press ,I,/Y to select "CAN ENG RATING". Then press 4/t_ to select the desired rating. Repeat steps 1 to 5 in Canadian English ratings. Press ,I,/Y to select "CAN FRE RATING". Then press 4/t_ to select the desired rating. V-CHIP SET TV RATING OFF MOVIE RATING CAN ENGRATING OFF L$*:SELECT _1 :ADJUST • See page 35 for setting details. Press EXIT to return to the normal screen. V-CHIP SET TV RATING OFF MOVIERATING CANFRE RATING OFF LJ:SELECT _ :ADJUST • See page 35 for setting details. Press RETURN. The LOCKS menu displays. Press A/V to select "V-CHIP", then press 4/ I_ to select "ON". Your setting are now set into memory. • If"V-CHIP" is not set to "ON", the V-CHIP setting will not work. LOCKS V-CHIPSET V-CHIPSET (DTV) NEWPASSWORD The V-CHIP block is working and censors a broadcast, "THIS PROGRAM HAS BEEN BLOCKED!" displays. Press MUTE while the V-CHIP is working and then the password entering menu displays. Enter your 4-digit password with 0-9. At this time V-CHIP block temporarily releases. You can reactivate the temporarily released V-CHIP block as shown below. Method 1 : Change to the other channel. Method 2: Switch off the TV power. €_*:SELECT _I:ADJUST • Performing any of the two above wilt activate the V-CHIP block. Press EXIT to return to the normal screen. _= 36