Sharp LC 32D6U LC-26D6U LC-32D6U LC-37D6U Operation Manual - Page 29
Power Control, Digital Setup, Audio Setup, Basic adjustment settings
UPC - 074000362994
View all Sharp LC 32D6U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Basic adjustment settings Power Control Power control setting allows you to save energy. No signal off When set to "Enable", the power will automatically shut down if no signal inputs for 15 minutes. 1 Press MENU and the MENU screen displays. 2 Press c/d to select "Power Control". 3 Press a/b to select "No Signal Off", and then press ENTER. 4 Press c/d to select "Enable", and then press ENTER. Digital Setup This setting allows you to optimize the settings of Digital broadcasting. Audio Setup You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV (see page 30). Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected. 1 Press MENU and the MENU screen displays. 2 Press c/d to select "Digital Setup". 3 Press a/b to select "Audio Setup", and then press ENTER. Enable Disable 4 Press a/b to select "PCM" or "Dolby Digital", and then press ENTER. • Five minutes before the power shuts down, remaining time displays every minute. NOTE • "Disable" is factory preset value. • When a TV program finishes, this function may not operate. No operation off When set to "Enable", the power will automatically shut down if there is no operation for 3 hours. 1 Repeat steps 1 and 2 in No signal off. 2 Press a/b to select "No Operation Off", and then press ENTER. 3 Press c/d to select "Enable", and then press ENTER. • Five minutes before the power shuts down, remaining time displays every minute. NOTE • "Disable" is factory preset value. PCM Dolby Digital Selected item PCM Dolby Digital Description The optical output terminal outputs audio signal by PCM form. If your digital audio system does not support Dolby Digital, select "PCM". The optical output terminal outputs audio signal by Dolby Digital form. It reproduces sound from surround program of digital. 28