Sharp LC-32LB150U User Guide - Page 52

LC-32LB150U Sharp 32" LED TV Adding or changing a channel label If a channel is not already labeled, you can label the channel to make it easier to identify. You can also relabel a channel that is already labeled. To add or change a channel label: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight CHANNELS, then press T or ENTER. The CHANNELS menu opens. Checking the digital signal strength You can check the digital signal strength to determine if you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. To check the digital signal strength: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight CHANNELS, then press T or ENTER. The CHANNELS menu opens. 3 Press S or T to highlight Channel Edit, then press ENTER. The CHANNELS · CHANNEL EDIT screen opens with the channel number field highlighted. 3 Press S or T to highlight Signal Strength, then press ENTER. The Signal Strength screen opens showing the signal strength meter. 4 Press S or T to select the channel you want to label, then press X to move to the channel label field. 4 Press MENU to return to the previous menu, or press EXIT to close the menu. 5 Press S or T to select a character, then press W or X to move to the previous or next character position. Repeat this step to enter additional characters. You can enter as many as 11 characters. 6 When you have completed the label, press ENTER. 7 Press EXIT to close the menu. 48 www.sharpusa.com