Sharp LC-32LB370U User Guide - Page 21
Coaxial good
View all Sharp LC-32LB370U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Coaxial (good) On your TV LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV Cable or satellite box Coaxial cable connector Coaxial cable ANT / CABLE jack Back of TV 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT / CABLE jack on the back of your TV and to the coaxial out jack on the cable or satellite box. 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press S or T to highlight TV, then press ENTER. 7 If you cannot tune to channels you know exist, scan for channels. See "Automatically scanning for channels" on page 48. Notes • Use a coaxial cable to eliminate interference and noise from radio waves. • Do not bundle the coaxial cable with the power cord or other cables. 17