Sharp LC 32SH20U Operation Manual - Page 33

Useful adjustment settings Allows you to use a password to protect certain settings from being accidentally changed. iMPORTANT: Three conditions must be met to enable the V-Chip (:b Password is registered. © V-CHIP settings have been made. (:3) "V-CHIP" is set to "ON". Setting a password Press MENU and the MENU screen displays. Press 4/t_ to select (LOCKS). Changing the password Allows you to change your current password. Repeat steps 1 to 3 in setting a password. • The password entering menu displays. Input the 4-digit password by using 0-9, then press ENTER. Press A/V to select "NEW PASSWORD", then press 4/i_. LOCKS= V-CHIP OFF V-CHIPSET _, Press A/V. The password entering menu displays. Select and enter a password (4 digits) using the number buttons (0-9), then press ENTER. tEl:SELECT I_:ADJUST Enter a new password using 0-9, then )ress ENTER. LOCKS LOCKS [O-9]:SELECT ENTER:SET EXIT:END "_" appears instead of the number. Enter the same password again to confirm, then press ENTER, the password is now registered and the LOCKS menu will appear on the screen. [O-9]:SELECT ENTER:SET EXIT:END Enter the same password again to confirm, then press ENTER. LOCKS LOCKS [O-9]:SELECT ENTER:SET EXIT:END [O-9]:SELECT ENTER:SET EXIT:END The screen returns to LOCKS menu. Your new password has been set. • As a precautionary measure, make a note of your password and keep it in a familiar place. • The "V-CHIP SET (D-IV)" wilt only be setectabte when a new rating system can be downloaded via digital broadcasting in the U.S. _= 32