Sharp LC 32SH20U Operation Manual - Page 9

QUICK REFERENCE If the remote control fails to operate TV functions, replace the batteries in the remote control unit. I Open the battery cover. 2 Insert two "AA" size batteries (supplied with the product). 3 Close the battery cover. Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment. Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. • Do not mix batteries of different types. Different types of batteries have different characteristics. Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries. Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth. The batteries supplied with this product may have a shorter life expectancy due to storage conditions. If you will not be using the remote control unit for an extended period of time, remove batteries from it. Remote control sensor IMPORTANT: The POWER indicator on the television should light GREEN indicating you have power to the television. If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the power on. CDCD MUTE (::3 I_ DISPLAY INPUT @® IMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. Please refer to the BASIC ADJUSTMENT SETTINGS SECTION and basic Initial setup functions and USING EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc) in your operation manual. _=8