Sharp LC 32SH20U Operation Manual - Page 6

iMPORTANT SAFETY iNSTRUCTiONS . Outdoor Antenna Grounding -- If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and buitt-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSl/NFPA 70 ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) NEC -- NATIONAL ELECTRICAL CODE GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS = POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) I To prevent fire, never place any type of candle or flames on the top or near the -IV set. I To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product. I o prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items. Turn off the main power and unplug the AC cord from the wall outlet before handling. Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may scratch the panel surface. Use a soft damp cloth to gently wipe the panel when it is really dirty. (It may scratch the panel surface when wiped strongly.) If the panel is dusty, use an anti-static brush, which is commercially available, to clean it. To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage the panel surface. . Do not display a still picture for a long time, as this could cause an afterimage to remain. J/ ©,_,_ _ / J _"_ J )