Sharp LC-37HV6U LC-37HV6U Operation Manual - Page 10
Setting the System - avc system
View all Sharp LC-37HV6U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Preparation Setting the System After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the cable clamps for bundling the cables. 1 Removing the terminal cover Display (rear view) Press the two hooks toward the center of the Display and remove the cover toward you. Press down the two upper hooks to remove the cover toward you. 2 Connecting the system cable and the AC cord to the Display (WHITE) Connect the plug into the terminal and secure it by tightening the thumb screws. AC cord (with ferrite core) (BLACK) Connect the plug completely. System cable (GRAY) Connect the plug firmly until the hooks on both sides click. 3 Connecting the system cable and the AC cord to the AVC System System cable (BLACK) AVC System (rear view) (WHITE) (GRAY) IMPORTANT You cannot use external speakers when you are using the optional system cable (AN-07SC1). AC cord CAUTION • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED. 9