Sharp LC-37HV6U LC-37HV6U Operation Manual - Page 45

Using external equipment Watching broadcasts via a Digital TV tuner Connecting a Digital TV tuner You can use the INPUT 3 terminal when connecting a Digital TV tuner and other audiovisual equipment. AVC System (rear view) Component video cable (commercially available) When using component video cable, select "COMPONENT" for "Input Select" in the menu. S-video cable (commercially available) AV cable (commercially available) DVI cable (commercially available) When using DVI cable, select "DVI" for "Input Select" in the menu. NOTE • When the device has a 15-pin terminal, use a commercially available D-sub cable to connect it. TV POWER TV CBL VCR DVD /SAT /LD /DTV ANT-A/B INPUT AV Virtual MODE MTS CC VIEW MODE TWIN PICTURE FREEZE SELECT SUB INPUT TWIN CH DISPLAY SLEEP EDIT/ LEARN 2 Display Digital TV tuner Select the desired signal type on "Input Select" in the "Option" menu. (See page 52.) For INPUT3 signal TV MENU [Option ... Input Select] Auto COMPONENT AV-Y/C DVI INPUT button Displaying broadcasts via a Digital TV tuner 1 44 To watch a Digital TV tuner image, select "INPUT3" from the "INPUT SOURCE" menu using INPUT on the remote control unit or on the Display. (See page 52.) INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 PC The setting is stored and can be selected on the "INPUT SOURCE" menu. NOTE • Each time INPUT is pressed, the input source toggles. • If the Digital TV tuner image does not come in clearly, you may need to change the input signal type setting on the "Input Select" menu. • Refer to your Digital TV tuner operation manual for the signal type. • DVI-HDTV INPUT supports digital and analog signals. Digital signal input: VGA (60Hz), 480p, 1080i, 720p Analog signal input: VGA (60Hz), 540p, 1080i • Use the PC INPUT terminals on the front of the AVC System when connecting a PC. (See page 46.) • When connecting to the DVI-HDTV INPUT terminal, be sure to use a commercially available DVI cable with ferrite core attached.