Sharp LC-60LE820UN LC-40LE820UN LC-46LE820UN LC-52LE820UN LC-60LE820UN - Page 9

Supplied Accessories Make sure the following accessories are provided with the product. LC-40LE820UN/ LC-46LE820UN/ LC-52LE820UN Remote control unit (g1) Page 8 "AAA" size battery (g2) Page 9 ■ Connection guide (g1) Cable clamp (g1) Page 8 Stand unit (g1) Page 7 Operation manual (g1) • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories. QUICK REFERENCE Attaching the Stand • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Confirm that there are 9 screws (5 short screws and 4 long screws) supplied with the stand unit. 4 Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit. 2 Attach the supporting post for the stand unit onto the base using the box for the stand unit as shown below. • The supporting post attaches to the base at an offcentered location on the base. Be sure to attach the supporting post in the direction indicated below and attach the stand to the TV with the wider side of the base facing forward. Long screws Short screws 5 1 Insert the stand cover. 2 Insert the screw to secure the stand cover. Short screw 2 3 Insert the stand into the openings on the rear of the 1 TV. Soft cushion • To detach the stand, perform the steps in reverse order. 7