Sharp LC-C4067UN LC-C4067UN Operation Manual - Page 12

Watching TV Turning On/Off the Power POWER Press POWER on the TV or on the remote control unit to turn the power on. • POWER indicator (Green): The TV is on. (After a few seconds, a window appears with sound.) POWER (On/Standby) • The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, the initial setup will not be invoked. For changing the settings of the initial setup, perform EZ setup on the Setup menu on page 19. Press POWER on the TV or on the remote control unit again to turn the power off. • The TV enters standby and the image on the screen disappears. • The POWER indicator on the TV turns off. • If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet. • Weak electric power is still consumed even when the TV is turned off. Initial Setup When you turn on the TV for the first time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 9.) 2. Connect the antenna cable to the TV. (See page 9.) 3. Plug in the AC cord to the AC outlet. (See page 8.) • ENERGY STAR qualification is based on AV MODE "STANDARD". Air/Cable (Antenna setting) Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". 3 Press a/b to select "Air" or "Cable", and then press ENTER. Language TV Location Air/Cable CH Search Air Cable Language (Language setting) Select from among 3 languages: English, French and Spanish. 1 Press a/b to select the desired language listed on the screen, and then press ENTER. Language TV Location Air/Cable CH Search English Français Español CH Search (Channel search) Channel auto search makes the TV look for all channels viewable in the set area. 4 1 After "Air/Cable" has been set, "CH Search" is highlighted. Press ENTER. Language TV Location Air/Cable TV Location Select "Home" or "Store" for the location where you plan to install the TV. This product qualifies for ENERGY STAR V3.0 in Home mode default setting. 2 Press a/b to select "Home" or "Store", and then press ENTER. Language CH Search 2 Press a/b to select "Analog & Digital" to search both analog and digital broadcasts or "Digital" to search only digital broadcasts or "Analog" to search only analog broadcasts, and then press ENTER. TV Location Air/Cable CH Search Home Store 3 Press a/b to select "Yes", and then press ENTER. Analog & Digital Home: "Power Saving" is set to "Off", and AV MODE is Digital Yes set to "STANDARD". Analog No Store: "Power Saving" is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set. Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" • The Channel search will start automatically. regardless of whether Picture Reset is "On" or "Off". If you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)". Feature Demo: When "On" is selected, after all the settings are completed, the Feature Demo screen is displayed if there is • If no channel is found, confirm the type of connection made with your TV and try EZ Setup again. (See page 19.) • For changing the settings of the initial setup, perform EZ setup on the Setup menu on page 19. no operation for several minutes. 12