Sharp MX-2310U MX-2310U Operation Manual - Page 189
Load the tab paper., Press the [COLOR START] key or the [BLACK & WHITE START] key.
View all Sharp MX-2310U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
COPIER Load the tab paper. Reverse side When using the bypass tray, place the paper with the print side down. Place the paper so that the sides with the tabs enter the machine last. 4 After loading the tab paper, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY" (page 2-38). The width of the tab paper can be as wide as 8-1/2" x 11" paper (8-1/2") plus 5/8" (or A4 width (210 mm) plus 20 mm). Press the [COLOR START] key or the [BLACK & WHITE START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then 5 touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.) To cancel scanning and copying... Press the [STOP] key ( ). To cancel tab copy... Touch the [Cancel] key in the screen of step 3. System Settings (Administrator): Initial Tab Copy Setting The default image shift width can be set from 0" to 5/8" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)". 2-80 Contents