Sharp MX-2615N Operating Guide - Page 832
SPECIFICATIONS in the Start Guide.
![]() |
View all Sharp MX-2615N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 832 highlights
TROUBLESHOOTING Problem Stapling does not take place. Point to check Is the paper type setting of the tray selected in the printer driver set to a paper type that cannot be stapled? Solution Check the paper type settings in the machine and select a tray that has paper that can be used for stapling*. Click the [Tray Status] button in "Paper Selection" on the [Paper] tab of the printer properties window and check the paper type setting of each tray. * Stapling is not possible on labels, tab paper, transparency film, glossy paper or envelopes. In addition, if "Disable Staple" is selected in the user type, stapling will not be possible. Have functions been disabled by the administrator? Check with your administrator. Some functions may have been disabled in the system settings (administrator). Punching does not take place. Does a message appear instructing you to check the punch module? Dispose of punch scraps. ☞ 1. BEFORE USING THE MACHINE "PUNCH MODULE" (page 1-44) Is a different size of paper mixed in? Punching is not possible when different widths of paper are mixed together. To perform mixed size punching, use paper of the same width and select the [Same Width] setting. When copying, select [Same Width] for [Mixed Size Original] in the special modes. Is a paper size that cannot be punched included in the print job? For the paper sizes that can be punched, see "SPECIFICATIONS" in the Start Guide. Is the tray selected in the printer driver set to a paper type that cannot be punched? Check the paper type settings in the machine and select a tray that has paper that can be used for punching*. Click the [Tray Status] button in "Paper Selection" on the [Paper] tab of the printer properties window and check the paper type setting of each tray. * Punching is not possible on labels, tab paper, transparency film, glossy paper and envelopes. In addition, if "Disable Punch" is selected in the user type, punching will not be possible. Have functions been disabled by the administrator? Check with your administrator. Some functions may have been disabled in the system settings (administrator). The stapling position or punch position is not correct. Is the stapling position set correctly? Are the punching positions set correctly? Check the stapling position setting. ☞ 2. COPIER "OUTPUT" (page 2-33) Check the punch position settings. ☞ 2. COPIER "OUTPUT" (page 2-33) Sheets output to the delivery tray of the finisher are scattered. Have the output sheets got folded? If the front and back side of the sheets in the paper feed tray have been reversed, in some cases it can be improved. The stapled sheets are scattered. Have the output sheets got folded? If the front and back side of the sheets in the paper feed tray have been reversed, in some cases it can be improved. 8-46 Contents
![](/manual_guide/products/sharp-mx2615n-operating-guide-2b151e4/832.png)