Sharp MX 3501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 161
Con the printer driver., Display printer information., Select the machine configuration.
View all Sharp MX 3501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
MAC OS X (v10.3.3 TO 10.4) 14 Configure the printer driver. 15 Display printer information. (1) (2) (1) (2) (3) (4) (1) Select [AppleTalk]. • If multiple AppleTalk zones are displayed, select the zone that includes the printer from the menu. • If you are using Mac OS X v10.4, click the [Default Browser] icon. (2) Click the machine's model name. The machine's model name usually appears as [SCxxxxxx]. ("xxxxxx" is a sequence of characters that varies depending on your model.) (3) Select [Auto Select]. If you are using Mac OS X v10.4, make sure that the PPD file of your model is selected. (4) Click the [Add] button. The PPD file of the machine is automatically selected and the peripheral devices installed on the machine are detected and automatically configured. • [IP Printing] can be selected (in Mac OS X v10.4 the [IP Printer] icon can be clicked) in (1) to print to the machine over a network using the IPP function. When the machine is in a remote location, this function can be used in place of the fax function to print a higher quality image than a fax. If you wish to use the IPP function, follow these steps to configure the printer driver. (1) Select [Internet Printing Protocol] in "Printer Type" ("Protocol" in Mac OS X v10.4). Enter the address of the machine (IP address or domain name) and the "Queue Name" (enter "ipp" in "Queue Name"). (2) Select [Sharp] in "Printer Model" ("Print Using" in Mac OS X v10.4) and click the PPD file of your model. (3) Click the [Add] button. • The PPD file is installed in the following folders on the startup disk. [Library] - [Printers] - [PPDs] - [Contents] [Resources] - [en.lproj] 32 (1) Click the machine's name. (2) Click [Show Info]. 16 Select the machine configuration. If you selected [Auto Select] in (3) of step 14, the machine configuration is detected and automatically configured. Check the configured settings to make sure they are correct. (4) (1) (2) (3) (1) Select [Installable Options]. (2) Select the options that are installed on the machine. (3) Click the [Apply Changes] button. (4) Click to close the window. You can check the options that are installed on the machine by printing out the "All Custom Setting List" in the system settings. (However, note that "Input Tray Options" must be set to the number of trays on the machine.) Follow these steps to print the "All Custom Setting List": Press the [SYSTEM SETTINGS] key, touch the [List Print (User)] key, and then touch the [All Custom Setting List] key. This completes the configuration of the printer driver.