Sharp MX-7001N MX-6201N MX-7001N Operation Manual Suite - Page 199

ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust) This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue). R(Red)+ G(Green)+ B(Blue)+ 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. (1) Touch the [Special Modes] key. 2 (2) Touch the keys to switch through the screens. (3) Touch the [Color Adjustments] key. (4) Touch the [RGB Adjust] key. ☞ [Color Adjustments] KEY (page 117) (2) (1) (3) 3 Color Adjustments RGB Adjust Only one color can be adjusted. OK Cancel OK R(Red) G(Green) B(Blue) -2 -1 0 1 2 Adjust red, green, or blue. (1) Touch the key of the color that you wish to adjust: [R (Red)], [G (Green)], or [B (Blue)]. Only one color can be adjusted. (If you adjust one color and then adjust another color, the adjustment of the first color is canceled.) (2) Adjust the selected color. Touch the [+] key to strengthen the selected color, or touch the [-] key to weaken the color. (3) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. 4 To cancel scanning and copying... Press the [STOP] key ( ). Press the [COLOR START] key ( ). Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOR START] key ( ). Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel an RGB adjust setting... Touch the [Cancel] key in the screen of step 3. 118