Sharp MX-B401 MX-B401 Operation Manual Suite - Page 691
Connecting The Machine
![]() |
View all Sharp MX-B401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 691 highlights
CONNECTING THE MACHINE CONNECTING TO A NETWORK To connect the machine to a network, connect the LAN cable to the machine's network connector. Use a shielded LAN cable. After connecting the machine to a network, be sure to configure the IP address and other network settings before installing the software. (The factory default setting for the IP address is to receive the IP address automatically when the machine is used in a DHCP environment.) Network settings can be configured using "Network Settings" in the system settings (administrator) on the machine. • If the machine is used in a DHCP environment, the IP address of the machine may change. If this happens, printing will not be possible. This problem can be avoided by using a WINS server or by assigning a permanent IP address to the machine. • This manual explains how to set up the software in a Windows network environment and in a Macintosh network environment. • To use the machine on an IPv6 network, the IPv6 setting must be enabled in "Network Settings" in the system settings (administrator). X Checking the IP address of the machine You can check the IP address of the machine by printing out the "All Custom Setting List" in the system settings. Follow these steps to print out the "All Custom Setting List". Press the [SYSTEM SETTINGS] key, touch the [List Print (User)] key, and then touch the [Print] key of "All Custom Setting List". 8
![](/manual_guide/products/sharp-mxb401-mxb401-operation-manual-suite-8afa365/691.png)