Sharp MX-B401 MX-B401 Operation Manual Suite - Page 731
Adding or changing a port., Click the [Ports] tab., Click the [Add Port], button., Select [SC2 TCP/
![]() |
View all Sharp MX-B401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 731 highlights
CHANGING THE PORT 3 Adding or changing a port. (1) Click the [Ports] tab. In Windows 98/Me, click the [Details] tab. (2) Click the [Add Port] button. (2) (1) • To change to a previously created port such as USB port, select the desired port (USB001, etc.) from the list and click the [Apply] button. This changes the port. • If the machine is being used on an IPv6 network, see "Changing to a Standard TCP/IP Port" (page 49) for the remaining steps of the procedure. 4 Select [SC2 TCP/IP Port] and then click the [New Port] button. In Windows 98/Me, select [Other], [SC2 TCP/IP Port], and then click the [OK] button. • The "SC2 TCP/IP Port" is added when the printer driver is installed using a "Standard installation", or a "Custom installation" with "LPR Direct Print (Specify Address/Auto Search)" selected. • If the printer driver is installed using a "Custom installation" with "IPP" selected, the [SC-Print2005 Port] is added. If you need to change the printer port when the machine is connected to an intranet or a wide area network (WAN) using the IPP function, select [SC-Print2005 Port], click the [New Port] button (the [OK] button in Windows 98/Me), and follow the on-screen instructions to create the port again. 48
![](/manual_guide/products/sharp-mxb401-mxb401-operation-manual-suite-8afa365/731.png)