Sharp MX-B402SC MX-B402 MX-B402SC Operation Manual - Page 145
Select [SC2 TCP/IP Port] and then click
View all Sharp MX-B402SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
BEFORE USING THE MACHINE Select [SC2 TCP/IP Port] and then click the [New Port] button. 4 • The "SC2 TCP/IP Port" is added when the printer driver is installed using a "Standard installation", or a "Custom installation" with "LPR Direct Print (Specify Address/Auto Search)" selected. • If the printer driver is installed using a "Custom installation" with "IPP" selected, the [SC-Print2005 Port] is added. If you need to change the printer port when the machine is connected to an intranet or a wide area network (WAN) using the IPP function, select [SC-Print2005 Port], click the [New Port] button, and follow the on-screen instructions to create the port again. Create the new port. (1) Enter the machine's IP address. ☞ Start Guide "Checking the IP address of the machine" (2) Make sure that [LPR] is selected. (3) Make sure that [lp] is entered. (4) Click the [OK] button. 5 (1) (2) (3) (4) 6 Click the [Close] button in the screen of step 4. Make sure the created printer port is selected in the printer properties window 7 and then click the [Apply] button. 1-104 Contents