Sharp MX-B402SC MX-B402 MX-B402SC Operation Manual - Page 725
Device Control
View all Sharp MX-B402SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 725 highlights
SYSTEM SETTINGS Device Control These settings control devices installed on the machine. Touch the [Device Control] key to configure the settings. Other Settings AB/Inch Type Setting The numbers and units of the default settings and input ranges that appear in the setting screens can be switched between inches and AB sizes. Default Original Size Settings Specify this setting when a particular original size is frequently used. The setting will appear in the [Original] key. Specifying this setting allows the original size setting to be omitted. Mode Settings Copy None*1, A5, B5, A4, 216mm x 330mm (8-1/2" x 13"), 8-1/2" x 13-2/5" (216mm x 340mm), 216mm x 343mm (8-1/2" x 13-1/2"), 8-1/2" x 11", 8-1/2" x 14", 5-1/2" x 8-1/2", 16K, Check Size*2, Card Size*2 Image Send None*1, A5, B5, A4, 216mm x 330mm (8-1/2" x 13"), 8-1/2" x 13-2/5" (216mm x 340mm), 216mm x 343mm (8-1/2" x 13-1/2"), 8-1/2" x 11", 8-1/2" x 14", 5-1/2" x 8-1/2", 16K, Check Size*2, Long Size Scan to HDD None*1, A5, B5, A4, 216mm x 330mm (8-1/2" x 13"), 8-1/2" x 13-2/5" (216mm x 340mm), 216mm x 343mm (8-1/2" x 13-1/2"), 8-1/2" x 11", 8-1/2" x 14", 5-1/2" x 8-1/2", 16K, Check Size*2, Card Size*2, Long Size *1When [None] is selected, the original size does not appear and must always be set manually. *2"Check Size" and "Card Size" are only for MX-B402SC. Setting of Default Original Exit Place Original Feeding Mode The following original feeding modes can be set to operate by default in copy, Scan to HDD, and image send modes. When a mode is frequently used, this saves you from having to select the mode in the special modes each time you need to use it. • Mixed Size Original (Same Width (Copy mode only)) • Slow Scan Mode • Blank Page Skip (image send* when using MX-B402SC) * Excluding fax mode and Internet fax mode. Auto Paper Selection Setting The paper types* that the Auto Paper Selection function will select can be specified. Select one of the following settings: • Plain Paper • Plain and Recycle Paper • Recycle Paper The Auto Paper Selection function will not select any paper types other than the paper types specified with this setting. * The paper type set for each paper tray using "Paper Tray Settings" (page 7-14) in the system settings (general). Detect Standard in Auto Color Mode When the color mode is set to auto in image send mode, the discrimination point for detecting whether originals are color or black and white can be set to one of 5 levels. To make it easier to detect a black and white original, adjust the setting toward [(Closer B/W)]. To make it easier to detect a color original, adjust the setting toward [(Closer color)]. MX-B402SC Only When the automatic document feeder is used, the original's* default output destination can be set to the upper exit or the heavy exit. * Except when "Size Input" or "Card Size" is selected for the original size. 7-69 Contents