Sharp MX-M350N MX-M350U MX-M450U MX-M350N MX-M450N Operation Manual - Page 206
Using The Administrator Settings - default admin password
![]() |
View all Sharp MX-M350N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
USING THE ADMINISTRATOR SETTINGS The procedure for configuring the administrator password is explained below using the "Change admin password" as an example. Follow the same steps to configure the settings that are described beginning on page 7. 1 Press the [SYSTEM SETTINGS] key. PY SYSTEM JOB STATUS SETTINGS 2 Touch the [ADMINISTRATOR SETTINGS] key. SENDER CONTROL FAX DATA RECEIVE/FORWARD ADMINISTRATOR SETTINGS 3 Use the numeric keys to enter the 5-digit administrator password. Each time a number is entered, the dashes (-) ADMINISTRATOR PASSWORD in the display will change to asterisks ( ). The factory default setting for the key operator code number is 00000. 4 Touch the [CHANGE ADMIN PASSWORD] key . NGS PRINTER SETTINGS CHANGE ADMIN PASSWORD If you wish to configure a different administrator setting, select the desired setting in this step. A screen for the selected setting will appear. Configure the setting as explained on pages 7 and following of this manual. 5 Use the numeric keys to enter the new 5-digit administrator password. Use a number for the administrator password 00000 ----- that has not been set as an account number for auditing mode (a number that has been set as an account number cannot be used). The entered number will be the new administrator password. Be sure to remember this number. 6 Touch the [OK] key. You will return to the screen of step 4. This completes the procedure for changing OK the administrator password. If you wish to configure another setting, touch the key of the desired setting in the screen of step 4. 7 Touch the [EXIT] key. EXIT You will exit the administrator settings. OPERATION SETTINGS 1/2 PRINTER 4
![](/manual_guide/products/sharp-mx450u-mxm350u-mxm450u-mxm350n-mxm450n-operation-manual-9522b59/206.png)