Sharp MX-M350N MX-M350U MX-M450U MX-M350N MX-M450N Operation Manual - Page 57
Use SHARP-recommended paper. LETTER HEAD.
View all Sharp MX-M350N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
TROUBLESHOOTING Problem Check Solution or cause Is paper other than SHARPrecommended paper being used? Use SHARP-recommended paper. (Page 2-16) Printed paper is wrinkled or the image rubs off easily. Is the paper size or weight outside the specifications? Paper damp? Use paper within the specifications. Be sure to store paper in the wrapper in a dry location and do not store paper in a location that is ●humid ●at a high temperature or an extremely low temperature ●exposed to direct sunlight ●dusty. 2 The contrast on the touch panel is too Is LCD contrast properly adjusted? high or too low. Adjust the screen contrast using "DISPLAY CONTRAST" in "Default settings" of the system settings. (Page 2-14) Printing takes place on the wrong side of the paper. The paper is loaded in the tray with the print side face down*. * Face up if the paper type is "PRE- PRINTED", "PRE-PUNCHED" or "LETTER HEAD". Load paper in the tray with the print side face up. However, if the paper type is "PRE-PRINTED", "PRE-PUNCHED" or "LETTER HEAD", load the paper with the print side face down*. * If the two-sided function has been prohibited using "DISABLING OF DUPLEX" in the administrator settings (page 11 of the administrator settings guide), load the paper face up. Marks appear at regular intervals on Paper with punch holes is being used. printed pages. If the original image overlaps the punch holes, marks will appear at the position of the holes on the back of the paper after one-sided printing, or on the front and back of the paper after two-sided printing. Make sure that the original image does not overlap the punch holes. 2-25