Sharp MX-M453N Safety Guide - Page 17

SPECIFICATIONS Finisher (large stacker) specifications*1 Model MX-FN11 Paper sizes A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR Paper weight Thin paper (56 g/m2 to 59 g/m2 (15 lbs. to 16 lbs.)) plain paper (60 g/m2 to 105 g/m2 (16 lbs. to 28 lbs.)) heavy paper (106 g/m2 to 209 g/m2 (28 lbs. bond to 110 lbs. index)) , envelopes (75 g/m2 to 90 g/m2 (20 lbs. to 24 lbs.)) Modes Non-staple, staple Allowed paper sizes for offset A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 8K, 16K Offset distance 30 mm (1-3/16") Tray capacity*2 Upper tray Lower tray Non-stapling*3: 1550 sheets (A4, B5, A5R, 8-1/2" x 11", 5-1/2" x 8-1/2"R, 16K) 650 sheets (A3W, A3, B4, A4R, B5R, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 8K, 16KR) Stapling*4: 100 sets or 1550 sheets (A4, B5, 8-1/2" x 11", 16K) 50 sets or 650 sheets (A3, B4, A4R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, 8K) Non-stapling*3: 2450 sheets (A4, B5, 8-1/2" x 11", 16K) 1700 sheets (A5R, 5-1/2" x 8-1/2"R) 650 sheets (A3W, A3, B4, A4R, B5R, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, 7-1/4" x 10-1/2", 8K, 16KR) Stapling*4: 100 sets or 1550 sheets (A4, B5, 8-1/2" x 11", 16K) 50 sets or 650 sheets (A3, B4, A4R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, 8K) Power supply Supplied from the machine Dimensions 645 mm (W) x 645 mm (D) x 1100 mm (H) (25-25/64" (W) x 25-25/64" (D) x 43-19/64" (H)) (When tray is extended) Weight Approx. 45 kg (99.3 lbs.) Stapler section Allowed paper sizes for stapling A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 8K, 16K (Three stapling positions: one staple at bottom left corner, one staple at top left corner, and two staples.) Maximum number of sheets for stapling*5 50 sheets (A4, B5, 8-1/2" x 11", 16K) 30 sheets (A3, B4, A4R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, 8K) (30 sheets when the sheets are the same width but different lengths.) *1 Paper pass unit and stand/1x500 sheet paper drawer or stand/2x500 sheet paper drawer are required to connect the finisher (large stacker) to the machine. *2 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper. *3 Up to 100 sheets of non-standard size paper, envelopes, and transparency film (A4 (8-1/2" x 11")) can be loaded. *4 The maximum number of sheets for stapling assumes a paper weight of 90 g/m2 (24 lbs.) and includes two cover sheets of 106 g/m2 to 209 g/m2 (28 lbs. bond to 110 lbs. index). Note: Special media such as transparency film and label sheets cannot be stapled or punched. 15