Sharp MX-M453N Safety Guide - Page 20
Punch module specifications for saddle stitch finisher, Keyboard specifications, Printer - pcl6
View all Sharp MX-M453N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
SPECIFICATIONS Punch module specifications (for saddle stitch finisher) Model MX-PNX5A MX-PNX5B MX-PNX5C MX-PNX5D Hole punching 2 holes 2 holes or 3 holes 4 holes 4 holes, broad width Allowed paper sizes for punching A3, B4, A4, A4R, B5, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2", 8K, 16K, 16KR 2 holes: 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, 7-1/4" x 10-1/2" 3 holes: 11" x 17", 8-1/2" x 11", A3, A4 A3, A4 A3, B4, A4, A4R, B5, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2" Punchable paper weights 56 g/m2 to 128 g/m2 (15 lbs. to 32 lbs.) Power supply Supplied from saddle stitch finisher Dimensions 122 mm (W) x 604 mm (D) x 248 mm (H) (4-13/16" (W) x 23-25/32" (D) x 9-49/64" (H)) Weight Approx. 3.5 kg (7.7 lbs.) Note: Special media such as transparency film and label sheets cannot be stapled or punched. Keyboard specifications Model Power supply MX-KBX2 Supplied from the machine Printer specifications Type Built-in Continuous printing speed Same as continuous copying speed (When printing same document continuously on A4 (8-1/2" x 11") plain paper in non-offset mode, excluding processing time.) Printing resolution 600 x 600 dpi / 1200 x 1200 dpi Printer driver type PCL5e, PCL6, PostScript 3 compatible*1, XPS*2 Supported protocols TCP/IP, IPX/SPX, NetBEUI, EtherTalk*1 Supported client PC operating systems See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide / Sharpdesk Installation Guide. Fonts PCL5e, PCL6 PostScript 3 compatible*1 80 European fonts, 28 barcode fonts*3, 1 bitmap font 136 European fonts Interface port LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T USB connectivity: Supports USB 2.0 (Hi speed)*4 Memory Standard system memory: 1 GB Expansion memory: 1 GB*5 Print area Entire page excluding margin of 4.2 mm (11/64") at each edge. The actual print area may vary depending on the printer driver and the software application. *1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer. *2 When the XPS expansion kit is installed. *3 Barcode font kit is required. *4 Supported operating systems are Windows 2000 / XP / Vista / Server 2008. *5 To install the XPS expansion kit, an expansion memory board is required. 18