Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 44

BEFORE USING THE MACHINE BEFORE USING THE MACHINE This section provides basic information about the machine. Please read this chapter before using the machine. PART NAMES AND FUNCTIONS EXTERIOR (1) (2) (3) (4) (5) (6) (7) (8) (1) Saddle stitch finisher (MX-FN16)* Output device that enables the use of the staple function and offset function. ☞ FINISHER AND SADDLE STITCH FINISHER (page 1-50) Finisher (MX-FN15)* Output device that enables use of the staple function, offset function and pamphlet copy function. ☞ FINISHER AND SADDLE STITCH FINISHER (page 1-50) Finisher (3 trays)* Output device that enables use of the staple function for up to 100 sheets (8-1/2" x 11" size paper). ☞ FINISHER (3 TRAYS) (page 1-56) (2) Punch module (AR-PN4B)* Punches holes in copies and other output. Requires finisher (MX-FN15) or saddle stitch finisher (MX-FN16). ☞ FINISHER AND SADDLE STITCH FINISHER (page 1-50) (3) Inserter (MX-CF10)* Paper set in an inserter can be inserted into output as covers or inserts. The inserter can be used to staple output and punch holes manually. ☞ INSERTER (page 1-61) (4) Automatic document feeder This automatically feeds and scans multiple sheet originals. Both sides of two-sided originals can be scanned at once. ☞ PLACING THE ORIGINAL (page 1-44) (5) Front cover Open to replace toner cartridge. ☞ TURNING THE POWER ON AND OFF (page 1-15) ☞ REPLACING THE TONER CARTRIDGES (page 1-72) (6) Operation panel This is used to select functions and enter the number of copies. ☞ OPERATION PANEL (page 1-8) (7) Center tray Finished sheets are deposited here. (8) Bypass tray Special papers (including transparency film) and copy paper can be fed from the bypass tray. ☞ LOADING PAPER IN THE BYPASS TRAY (page 1-42) 1-3 Contents