Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 91

BEFORE USING THE MACHINE FINISHER AND SADDLE STITCH FINISHER The finisher and the saddle stitch finisher include the offset function, which offsets each set of copies from the preceding set for easy separation. Each set of sorted copies can also be stapled. The saddle stitch finisher can automatically staple a set of copies at the center line and fold the pages to create a pamphlet. A punch module unit can be installed to add punch holes to copies, and an inserter can be installed to insert blank pages at specified pages. In the following explanations, the finisher and saddle stitch finisher are referred to simply as "finisher". PART NAMES (1) (2) (3) Finisher Saddle stitch (MX-FN15) finisher (MX-FN16) (4) (5) (6) Finisher (MX-FN15) Saddle stitch finisher (7) (MX-FN16) (1) Tray (5) Front cover Offset pages and stapled pages are delivered here. Open to replace the staple case in the staple unit or clear (2) Stapler compiler jammed staples. Paper to be stapled is stacked temporarily. (6) Lower cover (3) Top cover Open for misfeed removal. (4) Punch module (Option) Adds punch holes to printed pages. Open to clear misfed paper or replace the staple cartridge in the pamphlet unit. (MX-FN16 only) (7) Saddle stitch tray Saddle stitched output is delivered here. (MX-FN16 only) * The illustrations on the following pages (to page 1-55) show the MX-FN16; however, the operation of the MX-FN15 is the same as the MX-FN16. • Do not press on the finisher. • Use caution when near the offset tray during printing as the tray moves up and down. 1-50 Contents