Sharp MX-M700 MX-M550 MX-M620 MX-M700 Operation Manual - Page 37

LOADING PAPER Loading paper in paper tray 5 (optional large capacity tray AR-LC6) The large capacity tray can hold up to 3,500 sheets of 8-1/2" x 11" size (A4) SHARP standard paper (20 lbs. (80 g/m2)). If you wish to change the paper size, please consult your dealer (the paper size must be changed by a service technician). 1 Pull the tray out until it stops. When the tray is in operation, do not use excessive force to pull the tray out. This may damage the tray. 3 Push the tray firmly all the way into the machine. The paper table will 2 automatically rise to the paper feed position. 2 Place the paper in the center of the paper table. The paper stack must not be higher than the indicator line (up to 3,500 sheets of SHARP standard paper (20 lbs. (80 g/m2)) If the paper type was changed, be sure to change the appropriate settings as explained in "Setting the paper type and paper size" (See page 2-14). ■ Specifications Name Paper size Paper weight Paper capacity (plain) Dimensions Power supply Weight Overall dimensions when attached to machine Large capacity tray (AR-LC6) 8-1/2" x 11" (A4) 16 to 28 lbs. (60 to 105 g/m2) 3500 sheets (20 lbs. (80 /m2)) 14-23/32" (W) x 21-1/2" (D) x 20-13/32" (H) (376 mm (W) x 546 mm (D) x 518 mm (H)) Supplied from the main unit Approximately 62.9 lbs. (28.5 kg) 53-3/64" (W) x 26-47/64" (D) (1347 mm (W) x 679 mm (D)) Specifications are subject to change for improvement without notice. 2-7