Sharp NP-PX2201UL User Manual - NEC - Page 85

65

4. Using On-Screen Menu

4-6-6. NETWORK SETTINGS

Configure the network settings of the projector.

NOTE:

• [NETWORK SETTINGS] will not be changed even if [RESET ALL] is performed.

NETWORK MODE

Always select [LAN1]. [LAN2] is used for servicing.

STANDBY POWER

When [ON] is selected, you can exercise control via a wired LAN even when the projector is in

standby mode.

However, the power consumption in the standby mode is higher compared to the [OFF] mode.

DHCP

ON

The DHCP server automatically assigns an IP address, subnet mask

and gateway.

OFF

Manually set an arbitrary IP address or subnet mask assigned by the

network administrator.

IP ADDRESS

When [DHCP] is set to [OFF], this sets the IP address of the projector in the network which it is

connected to.

Use the following procedure to change the IP address.

1. Move the cursor to the IP address and press the button. Mode changes to the edit mode.

2. Press the

◀

/

▶

button to select a number.

3. Press the

▼

/

▲

button to increase or decrease the number.

4. Press the ENTER button to confirm.

SUBNET MASK

When [DHCP] is set to [OFF], this sets the subnet mask of the projector in the network which it

is connected to.

GATEWAY

When [DHCP] is set to [OFF], this sets the default gateway of the network the projector is con-

nected to.

Refer to the [IP ADDRESS] item for details on how to change the gateway.

DNS

Set the IP address of the DNS server of the network the projector is connected to.

Refer to the [IP ADDRESS] item for details on how to change the DNS.

AMX BEACON

If you connect the projector to a network compatible with the NetLinx control system of AMX

Corporation, you can enable/disable the detection setting from AMX Device Discovery.

ON

Enables the detection of the projector from AMX Device Discovery.

OFF

Disables the detection of the projector from AMX Device Discovery.

TIP:

•

AMX Device Discovery is a function to automatically detect a compatible device when it is con-

nected and download the Device Discovery Module required for control from the AMX server.

MAC ADDRESS

Displays the MAC address of the projector.

PROJECTOR NAME

Displays the name of the projector. Use the HTTP server function to change the name of the

projector. (

→

page

35

)

HOST NAME

Displays the host name of the projector.

Use the HTTP server function to change the host name of the projector. (

→

page

35

)

NOTE:

• When setting the geometric correction by ProAssist, be sure to set [NETWORK MODE] to [LAN2].

• Be sure to set [IP ADDRESS] not to conflict to other products on the same network.

• After set the geometric correction by ProAssist, be sure to set [NETWORK MODE] to [LAN1].

Section	Page
Front cover	1
Table of Contents	2
Important Information	6
1. Introduction	21
1-1. Introduction to the Projector	21
1-2. What’s in the Box?	24
1-3. Part Names of the Projector	25
1-4. Part Names of the Remote Control	29
Battery Installation	30
Remote Control Precautions	30
2. Projecting an Image (Basic Operation)	32
2-1. Flow of Projecting an Image	32
2-2. Connecting Your Computer/Connecting the Power Cord	33
2-3. Turning on the Projector	35
2-4. Selecting a Source	38
Using the Direct button on the remote control	38
Using the INPUT button on the projector cabinet	39
Select by displaying the On-Screen Menu	39
2-5. Adjusting the Picture Size and Position	40
Adjusting the vertical position of a projected image (Lens shift)	41
Adjusting the focus and zoom of the projected image	43
Adjusting the Tilt Foot	48
2-6. Turning off the Projector	49
3. Convenient Features	50
3-1. Turn off the light of the projector (LENS SHUTTER)	50
3-2. Turning Off the On-Screen Menu (On-Screen Mute)	50
3-3. Shift the On-Screen Menu displaying position	51
3-4. Magnifying a Picture	52
3-5. Adjustment of luminance (brightness) and energy-saving effect [LIGHT MODE]	53
3-6. Correcting Horizontal and Vertical Keystone Distortion [KEYSTONE]	54
3-7. Controlling the Projector by Using an HTTP Browser	55
3-8. Storing Changes for Lens Shift [LENS MEMORY]	57
3-9. Adjust boundaries of a projected image [EDGE BLENDING]	58
4. Using On-Screen Menu	64
4-1. Basic operations of the on-screen menu	64
4-1-1. Configuration of the on-screen menu screen	64
4-1-2. Adjustment bar	65
4-1-3. Confirmation message	65
4-1-4. Changing the number	65
4-2. List of Menu Items	66
4-3. INPUT	69
4-3-1. INPUT SELECTION	69
4-3-2. AUTO SOURCE	69
4-3-3. COLOR SPACE	69
4-3-4. ASPECT RATIO	70
4-3-5. OVERSCAN	71
4-3-6. IMAGE OPTIONS	71
4-3-7. TEST PATTERN	71
4-3-8. 3D	72
4-3-9. AUTO ADJUST	73
4-4. PICTURE	74
4-4-1. PRESET	74
4-4-2. CONTRAST/BRIGHTNESS/SHARPNESS/COLOR/HUE	74
4-4-3. COLOR TEMPERATURE	74
4-4-4. COLOR GAMUT	74
4-4-5. GAMMA CORRECTION	74
4-4-6. WHITE BALANCE	75
4-4-7. COLOR CORRECTION	75
4-4-8. NOISE REDUCTION	76
4-4-9. DYNAMIC CONTRAST	76
4-4-10. LIGHT OFF TIMER	76
4-5. DISPLAY	77
4-5-1. LENS LOCK	77
4-5-2. LENS CONTROL	77
4-5-3. LENS MEMORY	77
4-5-4. CENTER LENS	77
4-5-5. DIGITAL ZOOM	78
4-5-6. GEOMETRIC CORRECTION	78
4-5-7. BLANKING	82
4-5-8. EDGE BLENDING	82
4-5-9. SCREEN TYPE	82
4-6. SETUP	83
4-6-1. LANGUAGE	83
4-6-2. ORIENTATION	83
4-6-3. FAN MODE	84
4-6-4. AUTO POWER OFF	84
4-6-5. DIRECT POWER ON	84
4-6-6. NETWORK SETTINGS	85
4-6-7. LIGHT MODE	86
4-6-8. LIGHT ADJUST (LIGHT MODE)	86
4-6-9. CONSTANT BRIGHTNESS (LIGHT MODE)	86
4-6-10. BACKGROUND	86
4-6-11. STARTUP LOGO	87
4-6-12. REMOTE CONTROL	87
4-6-13. TRIGGER-1/2	89
4-6-14. MENU	89
4-7. INFO. And RESET ALL	90
4-7-1. INFO.	90
4-7-2. RESET ALL	90
5. Installation and Connections	91
5-1. Connecting to Other Equipment	91
6. Maintenance	93
6-1. Cleaning the Lens	93
6-2. Cleaning the Cabinet	93
7. Appendix	94
7-1. Throw distance and screen size	94
7-2. Compatible Input Signal List	98
7-3. Specifications	100
7-4. Cabinet Dimensions	103
7-5. Pin assignments and signal names of main terminals	104
7-6. Troubleshooting	107
7-7. Feature of each indicator	109
7-8. PC Control Codes and Cable Connection	111

Sharp NP-PX2201UL User Manual - NEC - Page 85

NETWORK SETTINGS, Conﬁgure the network settings of the projector.

Page 85 highlights