Home » Sharp Manuals » Projectors » Sharp NP-PX2201UL » Manual Viewer

Sharp NP-PX2201UL User Manual - NEC - Page 92

DisplayPort cable not supplied, BNC cable not supplied

Get Sharp NP-PX2201UL PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

5. Installation and Connections ① HDMI cable (not supplied) • Use a certified High Speed HDMI® Cable or High Speed HDMI® Cable with Ethernet. • When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu-ray player, the projector's video level can be made settings in accordance with the Blu-ray player's video level. In the menu select [ADJUST] → [VIDEO] → [VIDEO LEVEL] and make necessary settings. ② DisplayPort cable (not supplied) • Use a certified DisplayPort cable. ③ BNC cable (not supplied) • Use cables that are 5C-FB or higher (5C-FB, 7C-FB, etc.) or Belden 1694A or higher. In addition, use cables with a cable length 100m or less. • The length of cables that can be used may differ, depending on the signal. ④ LAN cable (not supplied) • Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially). • The HDBaseT/LAN port of the projector supports HDMI signals (HDCP) from transmission devices, control signals from external devices (serial, LAN) and remote control signals (IR commands). • The maximum transmission distance over the LAN cable is 100 m. • Please do not use other transmission equipment between the projector and transmission equipment. The picture quality may be degraded as a result. • This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially. ⑤ Computer cable (mini D-sub 15 pin) (not supplied) • Use a signal cable with ferrite core. ⑥ DVI-D cable (not supplied) • Use a signal cable with ferrite core. 72

Section	Page
Front cover	1
Table of Contents	2
Important Information	6
1. Introduction	21
1-1. Introduction to the Projector	21
1-2. What’s in the Box?	24
1-3. Part Names of the Projector	25
1-4. Part Names of the Remote Control	29
Battery Installation	30
Remote Control Precautions	30
2. Projecting an Image (Basic Operation)	32
2-1. Flow of Projecting an Image	32
2-2. Connecting Your Computer/Connecting the Power Cord	33
2-3. Turning on the Projector	35
2-4. Selecting a Source	38
Using the Direct button on the remote control	38
Using the INPUT button on the projector cabinet	39
Select by displaying the On-Screen Menu	39
2-5. Adjusting the Picture Size and Position	40
Adjusting the vertical position of a projected image (Lens shift)	41
Adjusting the focus and zoom of the projected image	43
Adjusting the Tilt Foot	48
2-6. Turning off the Projector	49
3. Convenient Features	50
3-1. Turn off the light of the projector (LENS SHUTTER)	50
3-2. Turning Off the On-Screen Menu (On-Screen Mute)	50
3-3. Shift the On-Screen Menu displaying position	51
3-4. Magnifying a Picture	52
3-5. Adjustment of luminance (brightness) and energy-saving effect [LIGHT MODE]	53
3-6. Correcting Horizontal and Vertical Keystone Distortion [KEYSTONE]	54
3-7. Controlling the Projector by Using an HTTP Browser	55
3-8. Storing Changes for Lens Shift [LENS MEMORY]	57
3-9. Adjust boundaries of a projected image [EDGE BLENDING]	58
4. Using On-Screen Menu	64
4-1. Basic operations of the on-screen menu	64
4-1-1. Configuration of the on-screen menu screen	64
4-1-2. Adjustment bar	65
4-1-3. Confirmation message	65
4-1-4. Changing the number	65
4-2. List of Menu Items	66
4-3. INPUT	69
4-3-1. INPUT SELECTION	69
4-3-2. AUTO SOURCE	69
4-3-3. COLOR SPACE	69
4-3-4. ASPECT RATIO	70
4-3-5. OVERSCAN	71
4-3-6. IMAGE OPTIONS	71
4-3-7. TEST PATTERN	71
4-3-8. 3D	72
4-3-9. AUTO ADJUST	73
4-4. PICTURE	74
4-4-1. PRESET	74
4-4-2. CONTRAST/BRIGHTNESS/SHARPNESS/COLOR/HUE	74
4-4-3. COLOR TEMPERATURE	74
4-4-4. COLOR GAMUT	74
4-4-5. GAMMA CORRECTION	74
4-4-6. WHITE BALANCE	75
4-4-7. COLOR CORRECTION	75
4-4-8. NOISE REDUCTION	76
4-4-9. DYNAMIC CONTRAST	76
4-4-10. LIGHT OFF TIMER	76
4-5. DISPLAY	77
4-5-1. LENS LOCK	77
4-5-2. LENS CONTROL	77
4-5-3. LENS MEMORY	77
4-5-4. CENTER LENS	77
4-5-5. DIGITAL ZOOM	78
4-5-6. GEOMETRIC CORRECTION	78
4-5-7. BLANKING	82
4-5-8. EDGE BLENDING	82
4-5-9. SCREEN TYPE	82
4-6. SETUP	83
4-6-1. LANGUAGE	83
4-6-2. ORIENTATION	83
4-6-3. FAN MODE	84
4-6-4. AUTO POWER OFF	84
4-6-5. DIRECT POWER ON	84
4-6-6. NETWORK SETTINGS	85
4-6-7. LIGHT MODE	86
4-6-8. LIGHT ADJUST (LIGHT MODE)	86
4-6-9. CONSTANT BRIGHTNESS (LIGHT MODE)	86
4-6-10. BACKGROUND	86
4-6-11. STARTUP LOGO	87
4-6-12. REMOTE CONTROL	87
4-6-13. TRIGGER-1/2	89
4-6-14. MENU	89
4-7. INFO. And RESET ALL	90
4-7-1. INFO.	90
4-7-2. RESET ALL	90
5. Installation and Connections	91
5-1. Connecting to Other Equipment	91
6. Maintenance	93
6-1. Cleaning the Lens	93
6-2. Cleaning the Cabinet	93
7. Appendix	94
7-1. Throw distance and screen size	94
7-2. Compatible Input Signal List	98
7-3. Specifications	100
7-4. Cabinet Dimensions	103
7-5. Pin assignments and signal names of main terminals	104
7-6. Troubleshooting	107
7-7. Feature of each indicator	109
7-8. PC Control Codes and Cable Connection	111