Sharp PC-AL27 Operation Manual - Page 139
The Setup Utility will open., F2> to enter System Configuration Utility
UPC - 074000044227
View all Sharp PC-AL27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
4. When the message to enter System Configuration Utility appears, press F2. The Setup Utility will open. 5. Insert the Recovery CD disc 1 into the optical drive. 6. In the Exit menu, select Load Setup Defaults; then, press Enter twice. 7. In the Boot Sequence of the Main menu, select CD-ROM Drive in the 1st Boot Device field and Hard Disk Drive in the 3rd Boot Device field. 8. Click OK. 9. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter twice. 10. Read the message on the screen, and select the way to recover your system; then, press Enter. When you select Recovers both C: and D: drive, the recovery process will delete the recovery data installed in the hard disk. Therefore you will not be able to recover your system from the hard disk. 11. Read the message and select Continue; then, press Enter. Follow the on-screen instructions for replacing the recovery CDs. Although the pointer may be shown on the screen, never touch the keyboard, the mouse or the screen during recovery except when the message prompts you to. If you touch them, the re-installation will be canceled. 12. After the recovery process completed, the system will restart automatically. When the message to enter System Configuration Utility appears, press F2. The Setup Utility will open. 13. In the Exit menu, select Load Setup Defaults; then, press Enter twice. 14. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter twice. The system will restart. 15. Set up Windows, following the instructions on the screen. Make sure to set date and time. A-25 Appendixes