Sharp PC-AL27 Operation Manual - Page 57
Using System Standby/Hibernate, Power Scheme - power supply
UPC - 074000044227
View all Sharp PC-AL27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
applications installed in the computer. • You can set your own Power scheme. Follow these steps to save the settings. 1. Set all power management settings to your suitable ones. 2. Click Save as.... 3. Type an appropriate name. 4. Click OK. • If the USB speaker or USB headphone produces noise, select Always runs at highest performance state. Once the preinstalled Power Scheme settings listed on the previous page are deleted, there is no way but re-installation to retrieve them. 2 Using System Standby/Hibernate System standby/hibernate is a very useful power management tool. For example, after the computer has entered the system standby mode, you can restart the computer more quickly when compared to restarting after a normal shutdown operation. When the computer resumes from the system standby/hibernate, the system restores the exact last state of the computer. In Windows, the System standby and System hibernate are defined as following: • System standby stores the current condition of the computer in RAM and stops power supply to all but a few essential components. Your system enters and resumes from the system standby per the conditions mentioned later. In the system standby, the power indicator blinks green and the power button blinks blue. To resume from the system standby, press any key. • System hibernate saves the current condition of the computer in part of the hard disk and turns off the computer. Your system enters and resumes from the system hibernate per the conditions mentioned later. In the system hibernate the power indicator is off. To resume from the system hibernate, press the power button. When entering/resuming from the system standby/hibernate, follow these instructions: • Finish communications, printing, and playing music or video before entering the system standby/hibernate. • Do not operate the computer or peripheral devices, or connect/disconnect peripheral devices, while entering/resuming from the system standby/hibernate. • Save your data before the computer enters the system standby. If the power supply to the computer is stopped, the RAM contents will be lost. 2-9