Sharp PG-C30XE Operation Manual - Page 18
Basic Operations
View all Sharp PG-C30XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Basic Operations 4 3 3 Rotate the zoom ring. The image can be adjusted to the desired size within the zoom range. 4 Rotate the focus ring until the image on the screen becomes clear. Operation EXAMPLE 5 f f 6 7 8 6 7 8 5 INPUT 1 Mode INPUT 2 Mode INPUT 3 (VIDEO) Mode 5 Press INPUT to select the desired input mode. Press INPUT again to change the mode. • When no signal is being received, "NO SIGNAL" will be displayed. When a signal that the projector is not preset to receive is being received, "NOT REG." will be displayed. 6 Press VOLUME to adjust the volume. 7 Press MUTE to temporarily turn off the sound. Press MUTE again to turn the sound back on. 8 Press POWER OFF. Press POWER OFF again while the message is displayed. • If you accidentally pressed POWER OFF and do not want to turn off the power, wait until the power off screen disappears. • When POWER OFF is pressed twice, the POWER indicator will light up red and the cooling fan will run for about 90 seconds. The projector will then enter standby mode. • Wait until the cooling fan stops before disconnecting the power cord. • The power can be turned on again by pressing POWER ON. When the power is turned on, the POWER indicator and the LAMP REPLACEMENT indicator light green. • The POWER indicator flashes if the bottom filter cover is not securely installed. E-17