Sharp PG-C45X PG-C45X Operation Manual - Page 30
Using as a Wired Remote Control, Connecting the Remote, Control to the Projector
UPC - 074000358690
View all Sharp PG-C45X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Connecting the Projector to Other Devices Using as a Wired Remote Control Connecting the Remote Control to the Projector When the remote control cannot be used due to the range or positioning of the projector (rear projection, etc.), connect a ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNW4870CEZZ) from the WIRED R/C JACK on the top of the remote control to the WIRED REMOTE control input terminal. WIRED REMOTE control input terminal To WIRED R/C JACK ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNW-4870CEZZ) -26
Connecting the Projector to Other Devices
Using as a Wired Remote Control
Connecting the Remote
Control to the Projector
When the remote control cannot be used due
to the range or positioning of the projector
(rear projection, etc.), connect a
ø
3.5 mm
minijack cable (commercially available or
available as Sharp service part QCNW-
4870CEZZ) from the WIRED R/C JACK on the
top of the remote control to the WIRED RE-
MOTE control input terminal.
ø
3.5 mm minijack cable
(commercially available or available as
Sharp service part QCNW-4870CEZZ)
To WIRED R/C JACK
WIRED REMOTE control input terminal
-26