Sharp PG-C45X PG-C45X Operation Manual - Page 92
Connecting Pin Assignments
UPC - 074000358690
View all Sharp PG-C45X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Connecting Pin Assignments INPUT 1/2 RGB and OUTPUT Signal Terminal: 15-pin Mini D-sub female connector RGB Input Component Input 1. Video input (red) 1. PR (CR) 2. Video input (green/sync on green) 2. Y 3. Video input (blue) 3. PB (CB) 4. Reserve input 1 4. Not connected 5. Composite sync 5. Not connected 5 1 6. Earth (red) 6. Earth (PR) 10 6 7. Earth (green/sync on green) 7. Earth (Y) 15 11 8. Earth (blue) 8. Earth (PB) 9. Not connected 9. Not connected 10. GND 10. Not connected 11. GND 11. Not connected 12. Bi-directional data 12. Not connected 13. Horizontal sync signal 13. Not connected 14. Vertical sync signal 14. Not connected 15. Data clock 15. Not connected RS-232C Terminal: 9-pin Mini DIN female connector 9 6 5 8 2 1 7 3 4 Pin No. 1 2 3 4 5 6 7 8 9 Signal VCC RD SD EXIR SG ERX RS CS ETX Name +3.3V (Reserved) Receive Data Send Data Detector of Option Unit (Reserved) Signal Ground IR Receive Signal from IR Amplifier (Reserved) Request to Send Clear to Send IR Transmit Signal (Reserved) I/O Output Input Output Input Input Output Input Output Reference Not connected Connected to internal circuit Connected to internal circuit Not connected Connected to internal circuit Not connected Not connected Not connected Not connected 9-pin D-sub male connector of the DIN-D-sub RS-232C adaptor 1 5 69 Pin No. 1 2 3 4 5 6 7 8 9 Signal CD RD SD ER SG DR RS CS CI Name Receive Data Send Data Signal Ground Data Set Ready Request to Send Clear to Send I/O Input Output Output Input Reference Not connected Connected to internal circuit Connected to internal circuit Not connected Connected to internal circuit Not connected Connected to internal circuit Connected to internal circuit Not connected RS-232C Cable recommended connection: 9-pin D-sub female connector 5 1 96 Pin No. 1 2 3 4 5 6 7 8 9 Signal CD RD SD ER SG DR RS CS CI Pin No. 1 2 3 4 5 6 7 8 9 Signal CD RD SD ER SG DR RS CS CI Note • Depending on the system layout, it is necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. PC). Projector Pin No. 4 5 6 PC Pin No. 4 5 6 USB Terminal: 4 pin B-type USB connector Pin No. Signal 1 VCC 2 1 2 USB- 3 USB+ 3 4 4 SG Name USB power USB data- USB data+ Signal Ground -88