Sharp PG-C45X PG-C45X Operation Manual - Page 70
Setting the Video System, System
UPC - 074000358690
View all Sharp PG-C45X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Setting the Video System The video input system mode is preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the video signal difference. In that case, switch the video signal. Setting the Video System Select "Video System" in the "Options (1)" menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Note • The video signal can only be set in IN- PUT 3 or INPUT 4 mode. • In "Auto", images are displayed in PAL even if PAL-N or PAL-M input signals are received. PAL SECAM NTSC4.43 NTSC3.58 When connected to PAL video equipment. When connected to SECAM video equipment. When reproducing NTSC signals in PAL video equipment. When connected to NTSC video equipment. -66