Sharp PG-F317X PG-F317X Operation Manual - Page 29
Connecting the Power Cord - data projector
UPC - 074000365520
View all Sharp PG-F317X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
When connecting to the LAN terminal using a LAN cable TX/RX LED (yellow) Illuminates when transmitting/receiving data. LINK LED (green) Illuminates when linked. * To ensure safety, do not connect the LAN terminal with any cables that may cause excessive voltage such as a telephone line. Hub or Computer To LAN terminal LAN cable (Category 5 type, commercially available) Note • When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially available). • When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially available). Connections Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. AC socket To AC outlet Power cord (supplied) 25