Sharp PG-F317X PG-F317X Operation Manual - Page 50
Adjusting the Projector Function PRJ - ADJ Menu
UPC - 074000365520
View all Sharp PG-F317X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Adjusting the Projector Function ("PRJ - ADJ" Menu) Pict. SCR PRJ-ADJ 1 Auto Sync 2 Auto Power Off 3 Auto Restart 4 STANDBY Mode 5 System Sound 6 Speaker 7 Audio Input 8 RS-232C 9 Fan Mode 0 System Lock Lamp Timer(Life) 0h Net. Help On On On Standard On On Audio 1 9600bps Normal Disable 0 min 100% SEL./ADJ. ENTER END 1 Auto Sync (Auto Sync Adjustment) Selectable items On Off Description Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. Auto Sync adjustment is not automatically performed. Note • Auto Sync adjustment is also performed by pressing AUTO SYNC on the remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 51.) 2 Auto Power Off Function Selectable items On Off Description When no input signal is detected for more than 15 minutes, the projector will automatically enter standby mode. The Auto Power Off function will be disabled. Note • When the Auto Power Off function is set to "On", 5 minutes before the projector enters standby mode, the message "Enter STANDBY mode in X min." will appear on the screen to indicate the remaining minutes. 46 Menu operation n Page 39 3 Auto Restart Function Selectable items On Off Description If the power cord is unplugged from the outlet or the breaker switch is turned off when the projector is on, then the projector automatically turns on when the power cord is plugged into the AC outlet or the breaker switch is turned on. The projector does not turn on automatically when the power cord is plugged into the AC outlet or the breaker switch is turned on. 4 STANDBY Mode When set to "Eco", power consumption is reduced in standby mode. Selectable items Eco Standard Description The monitor output, RS-232C and Network functions are switched off in standby mode. The monitor output, RS-232C and Network functions are activated even if the projector is in standby mode. 5 Setting the Confirmation Sound (System Sound) Selectable items On Off Description A confirmation sound is made when the projector turns on/off. No confirmation sound is made. 6 Speaker Setting Selectable items On Off Description The audio signal is output from the internal speaker. The audio signal is not output from the internal speaker.