Sharp PG-F317X PG-F317X Operation Manual - Page 51
Monitor Output
UPC - 074000365520
View all Sharp PG-F317X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
6 7 AMuodnioitIonrpOututput This function allows you to select an appropriate combination of audio input terminals for each input mode. Selectable items Audio 1 Audio 2 Description The AUDIO 1 input terminal is used as an audio input terminal. The AUDIO 2 input terminal is used as an audio input terminal. 8 Selecting the Transmission Speed (RS-232C) Make sure that both the projector and computer are set for the same baud rate. Selectable items Description 9600bps Transmission spePed is slow. R 115200bps Transmission speed is rapid. 9 Fan Mode Setting This function changes the fan rotation speed. Selectable items Description Normal Suitable for normal environments. High Select this when using the projector at altitudes of approximately 1,500 meters (4,900 feet) or more. When "Fan Mode" is set to "High", the fan rotation speeds up, and the fan noise becomes louder. 0 System Lock Function This function prevents unauthorized use of the projector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only authorized users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 58). Even if the product warranty is valid, the keycode reset will incur a charge. Menu operation n Page 39 a Setting/Changing the keycode 1 Select "System Lock", then press ENTER or Q. 2 Select "Next", then press ENTER. • The screen for entering the keycode appears. 3 Press the 4 buttons on the remote control or on the projector to enter the preset keycode in "Old Code". • When setting the keycode for the first time, press R on the projector for four times. PRJ - ADJ Setting the System Lock Old Code New Code Reconfirm Note • If you input a wrong keycode, the cursor returns to the first point of the "Old Code". • The preset keycode is 4 R buttons on the projector. When you press the R button four times, the keycord input screen disappears. 4 Press the 4 buttons on the remote control or on the projector to enter the new keycode in "New Code". Note • You cannot use the following buttons for keycode: STANDBY/ON, ON, STANDBY, ENTER, L-CLICK, R-CLICK/RETURN and MENU/HELP • System lock function recognizes each button on the remote control or on the projector as an individual button, even if they share the same button name. If you used the buttons on the projector in setting your keycode, the keycode cannot be canceled with the remote control. PRJ - ADJ Setting the System Lock Old Code New Code Reconfirm **** ---- ---- Useful Features 47