Sharp PN-525UP PN-525U Operation Manual - Page 23

ENGLISH Menu Items Enlarge You can align 4, 9, 16, or 25 monitors and integrate them into a single large screen to display. Enlarged views of separated images are displayed in each monitor. In horizontal orientation Original image SCHEDULE You can set the time to switch the monitor on and off. Set this function with "SCHEDULE" in the OPTION menu. (See page 19.) SCHEDULE XXXX/XX/XX XXX XX:XX:XX PC2 ANALOG No. (1) POWER (2) DAY OF THE WEEK (3) TIME (4) INPUT (5) 4 monitors 0 1 2 3 16 monitors 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 In vertical orientation Original image 9 monitors 0 1 2 3 4 5 6 7 8 25 monitors 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 4 monitors 2 0 3 1 16 monitors 12 8 4 0 9 13 5 1 14 2 10 6 15 11 7 3 9 monitors 6 3 0 7 4 1 8 5 2 25 monitors 20 15 10 5 0 21 16 11 6 1 22 17 12 7 2 23 18 13 8 3 24 19 14 9 4 TIPS • AV input signals cannot be used for the Enlarge function. • To integrate 9 or more monitors using PC1 signals, a splitter for the video signal (commercially available) is required. • When connected in PC2/PC3, a splitter for the video signal (commercially available) is required. • When Enlarge is used, the SCREEN MOTION function is disabled. • When Enlarge is used, the AUTO INPUT CHANGE function is disabled. 1024x768 V: 60 Hz H: 48.4 kHz OK...[MENU] 1. Press or to select the SCHEDULE number, and press . 2. Set the SCHEDULE. (See the description below.) Press or to select items, and press or to change the setting. 3. Press . MENU SCHEDULE becomes effective. (1) ●: SCHEDULE effective -: SCHEDULE not effective (2) POWER ON : Switches the monitor on at the specified time. OFF : Switches the monitor off at the specified time and puts the monitor in standby mode. (3) DAY OF THE WEEK Specifies the day of the week to execute the SCHEDULE. ONLY ONCE: Executes the SCHEDULE once on the specified day. Specify the day of the week to execute the SCHEDULE. EVERY WEEK: Executes the SCHEDULE on the specified day of the week every week. Specify the day of the week to execute the SCHEDULE. Periodic setting such as "Monday through Friday" is also possible. EVERY DAY: Executes the SCHEDULE every day regardless of the day of the week. (4) TIME Specifies the time to execute the SCHEDULE. Set the time on a 24-hour basis. (5) INPUT Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears. Input modes displayed on "PC1/AV1" depend on DVI SELECT settings. Input modes displayed on "PC3/AV2" depend on BNC SELECT settings. 21 E