Sharp PN-525UP PN-525U Operation Manual - Page 35

Specifications

Page 35 highlights

ENGLISH Specifications Product Specifications Model LCD element Max. resolution (pixels) Max. colors Pixel pitch Viewing angle Screen active area inch (mm) Computer input signal Sync signal Video color system Plug and play Power management Input terminals Output terminals Power requirement Operating temperature Operating humidity Power consumption Dimensions inch (mm) Weight lbs. (kg) PN-525U 52" wide (132.2 cm diagonal) ASV low-reflection black TFT LCD 1920 x 1080 16.77 M colors (8 bits/color) 0.600 mm (H) x 0.600 mm (V) 176° right/left/up/down (contrast ratio ≥ 10) 45-3/8 x 25-1/2 (1152.0 x 648.0) Digital (DVI 1.0 standard-compliant), Analog RGB (0.7Vp-p) [75 Ω] Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz) VESA DDC2B VESA DPMS, DVI DMPM PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1 PC Analog Mini D-sub 15 pin, 3 rows x 1, BNC *1*2 x 1 Audio 3.5 mm mini stereo jack x 1 AV Composite video BNC x 1 Component BNC (Y, Cb/Pb, Cr/Pr)*1 x 1 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 PC/AV Digital DVI-D 24 pin x 1 *3 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 Speaker 7 W + 7 W [6 Ω] AC 120 V, 60 Hz 32°F to 104°F (0°C to 40°C) 20% to 80% (no condensation) 325 W (Input signal waiting mode: 11.5 W*4, Standby mode: 3.5 W) Approx. 49-3/8 x 5-7/8 x 29-3/16 (1,254 x 149 x 742) (excluding protrusions) Approx. 97.0 (44) (excluding the temporary stand) *1 Cannot be used simultaneously. *2 Does not support plug and play. *3 Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function. *4 When AUTO INPUT CHANGE is ON. 7.5 W when it is OFF. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product imporovement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 33 E

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

ENGLISH
33
E
Specifications
Product Specifications
Model
PN-525U
LCD element
52" wide (132.
2
cm diagonal) ASV low-reflection black TFT LCD
Max. resolution
(pixels)
1920 x 1080
Max. colors
16.77 M colors (8 bits/color)
Pixel pitch
0.600 mm (H) x 0.600 mm (V)
Viewing angle
176° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm)
45-3/8 x 25-1/2 (1152.0 x 648.0)
Computer input signal
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7Vp-p) [75
]
Sync signal
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video color system
PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)
Plug and play
VESA DDC2B
Power management
VESA DPMS, DVI DMPM
Input terminals
PC/AV
Digital
DVI-D 24 pin (HDCP compatible) x 1
PC
Analog
Mini D-sub 15 pin, 3 rows x 1, BNC
*1*2
x 1
Audio
3.5 mm mini stereo jack x 1
AV
Composite video
BNC x 1
Component
BNC (Y, Cb/Pb, Cr/Pr)
*1
x 1
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
Output terminals
PC/AV
Digital
DVI-D 24 pin x 1
*3
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
Speaker
7 W + 7 W [6
]
Power requirement
AC 120 V, 60 Hz
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating humidity
20% to 80% (no condensation)
Power consumption
325 W (Input signal waiting mode: 11.5 W
*4
, Standby mode: 3.5 W)
Dimensions
inch (mm)
Approx. 49-3/8 x 5-7/8 x 29-3/16 (1,254 x 149 x 742) (excluding protrusions)
Weight
lbs. (kg)
Approx. 97.0 (44) (excluding the temporary stand)
*1
Cannot be used simultaneously.
*2
Does not support plug and play.
*3
Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function.
*4
When AUTO INPUT CHANGE is ON. 7.5 W when it is OFF.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product imporovement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.